Biomass Pellet Making Machine Wood Sawdust Pellet Mill
Vertical Ring Die Pellet Machine is a new biomass fuel production machinery by processing scrap from forest and agricultural waste like eucalyptus, pine, birch, poplar, fruit and agricultural straw, bamboo. Compared with the old machine, it absorbed the essence of horizontal ring die and flat die pellet machine, solved the insufficient pressure, die crack problems of horizontal ring die pellet machine, and overcame the small capacity, high failure rate of flat die pellet machine.
It adopt the large modulus hardened surface helical gearbox, main shaft reinforcement, power output is strong, good stability, low failure rate, low production cost, so it is the first choice machinery for biomass energy industry.
| Model |
LD560A |
LD700 |
LD720 |
| Capacity |
1-1.5t/h |
1.5-2 t/h |
2-2.5t/h |
| Pellet diameter |
6/8/10 mm |
6/8/10 mm |
6/8/10 mm |
| Size |
2300*1350*1950mm |
2300*1350*1950mm |
2400*1400*2000mm |
| Weight |
5.3tons |
5.4tons |
6.3tons |
| Deceleration model |
Gear level 3 drive |
| Gearbox weight |
2tons |
| Roller type |
Sealed roller without lock |
| Die material |
Alloy steel or Stainless steel |
| Die heat treatment hardness |
HRC55-60 |
| Die lifetime |
800-1000 Hours(alloy steel)
1000-1500 Hours (stainless steel) |
(1) Big Gear Box
The gearbox adopts independent research and development big 3 level drive,module increased , gear strengths increased,carrying more and more ability.The service life increased 8-10 times than the traditional reducer,greatly increase the service life.
(2) Casting material of gearbox with high stability.
Gearbox body is casted. Its advantages has strong,good heat dissipation,low heat deformation, high steady etc. Avoid disadvantages of the bad sealing for welding boby, easily deformation due to high heat,low steady in basis etc.
(3) Parallel vertical installation reduce energy consumption loss.
The motor and main shaft of wood pellet machine supplier are parallel vertical installed , which can reduce energy consumption loss in the process of transmission, more output power, higher transformation of energy efficiency.
Materials:Sawdust,Rice Husk,Wood Chips,Straw,Wood Waste etc.
The biomass pellet machine machine is applied to the materials with low adhesiveness and low shaping rate such as the rice husk,
sunflower seed husk,peanut shell and other fruit shell;branch,trunk,bark and other wood waste;a variety of corp straws.
Biomass pellets are alternative fuels to non-renewable energy sources such as coal, petroleum, and natural gas, which can
save energyand reduce carbon emissions. It is an efficient and clean renewable energy source. They can obtain heat energy
through combustionand are widely used in life heating, power generation and other fields.
We are group enterprise specialized in R&D,manufacturing and sales of biomass energy equipment.Its predecessor was Yantai Lida Woodworking Machinery Co.,Ltd.,with 60 years of machinery manufacturing experience and 30 years exporting experience,now our machinery cover more than 20 series,more than 200 models,widely used in electric power,metallurgy,chemical,environmental protection,paper,dyeing and weaving industries.
Strong technical support,sophisticated production equipment,advanced testing methods,superb production technology,and scientific and standardized management,our products quality have been guaranteed and exported to Europe,South America,Southeast Aisa and Africa countries,received high reputation from domestic and foreign customers.
Customer first,integrity,innovation,openness,standardization,and continuous love are the core values that every one of us has always remembered.We are committed to creating the most creative enterprise in the pellet machine industry,bearing in mind the vision of creating a better life,so that customers have no worries.
1.Will you send engineers to install the plant?
Our machines are well designed and easy installation. Engineers will be send when clients meet problems they can't solve by themselves.
2.How about the quality of your products?
The materials we used purchase from stable supplier and our quality controller guarantee each process no-mistake. Most of our clients' feedback
said that LIDA has good quality control and the machine have good performance.
3.Do you provide after-sale service?
We believe that after-sale service is one of the most important section in whole sales process. So, our team will treat every client by a high standard.What's the lifetime of the wearing parts?. If you have any question after purchase, we will solve them.
4.What about the size of the final wood pellet product?
The pellets diameter between 4 to 12mm.Our standard ring die diameter are 6,8,10mm. We can also offer customization for each client.
5.What's the lifetime of the wearing parts?
It depends on the materials you use. The fewer impurities, the longer wearing parts will use. If you pay more attention to maintenance,
it will make lifetime longer.
We trust that our experience and intimate knowledge of this line will entitle us to your confidence.
The more you know us, the more you trust us!
Audited Supplier 
){kind=link}
){kind=link}